- Single & Double Row Deep Groove Ball Bearings
Single & Double Row Deep Groove Ball Bearings
Metric and imperial, thin section and wide-series single- and double row deep groove ball bearings, and non-standard – variants including open, sealed, snap ring & groove, cages in steel, brass and polymer, and many other variations.
Deep groove ball bearings are the most common type of ball bearing and as such are used in a wide variety of applications and industries.
Full range of single row: 68** / 69** / 60** / 62** / 63** / 64** / 16*** series
Full range of double row: 42** / 43** series
- Miniature Ball Bearings
Miniature Ball Bearings
Wide range of miniature deep groove ball bearings available – metric, inch / imperial, thrust, stainless steel and flanged.
Bore 1 – 9mm
68** / 69** / 60** / 62** / 63** series
- Maximum Type
BL extra-wide series maximum-type deep groove ball bearings.
- Magneto Bearings
A deep groove ball bearing inner & an outer ring with only one shoulder. Separable pieces means easy assembly.
- Single Row Angular Contact Ball Bearing
Single Row Angular Contact Ball Bearing
Contact angles 15 / 25 / 30 / 40 degrees
Bore from 10 – 200mm
Available for matching – Back-to-Back (DB) Face-to-Face (DF) and Tandem (DT) configurations
79** / 70** / 72** / 73** series
- Double Row Angular Contact Ball Bearing
Double Row Angular Contact Ball Bearing
32** / 33** / 52** / 53** series
Bore 10 – 85mm
Pressed steel or polymer cage
Sealing available in Z or RS variants
- Super Precision – Single & Matched ACBB
Super Precision – Single & Matched ACBB
79** – 73** series, suitable for back-to-back, face-to-face and tandem mounting.
- Double Direction Angular Contact Thrust Ball Bearings
Double Direction Angular Contact Thrust Ball Bearings
10 – 190mm bore. Flat seat; aligning seat & aligning seat washer.
- Bearings for Supporting Ball Screws
Bearings for Supporting Ball Screws
Angular contact ball bearings designed specifically for machine tool applications.
- Self-Aligning Ball Bearings
Self-Aligning Ball Bearings
Designed to work in applications where misalignment / bending of shaft is evident.
Wide range available 04 > 110mm bore.
4-7 degrees of misalignment is allowed under normal loads.
12** / 13** / 22** / 23** / 1** series